Total
2120 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2025-21701 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: avoid race between device unregistration and ethnl ops The following trace can be seen if a device is being unregistered while its number of channels are being modified. DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 3 PID: 3754 at kernel/locking/mutex.c:564 __mutex_lock+0xc8a/0x1120 CPU: 3 UID: 0 PID: 3754 Comm: ethtool Not tainted 6.13.0-rc6+ #771 RIP: 0010:__mutex_lock+0xc8a/0x1120 Call Trace: <TASK> ethtool_check_max_channel+0x1ea/0x880 ethnl_set_channels+0x3c3/0xb10 ethnl_default_set_doit+0x306/0x650 genl_family_rcv_msg_doit+0x1e3/0x2c0 genl_rcv_msg+0x432/0x6f0 netlink_rcv_skb+0x13d/0x3b0 genl_rcv+0x28/0x40 netlink_unicast+0x42e/0x720 netlink_sendmsg+0x765/0xc20 __sys_sendto+0x3ac/0x420 __x64_sys_sendto+0xe0/0x1c0 do_syscall_64+0x95/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e This is because unregister_netdevice_many_notify might run before the rtnl lock section of ethnl operations, eg. set_channels in the above example. In this example the rss lock would be destroyed by the device unregistration path before being used again, but in general running ethnl operations while dismantle has started is not a good idea. Fix this by denying any operation on devices being unregistered. A check was already there in ethnl_ops_begin, but not wide enough. Note that the same issue cannot be seen on the ioctl version (__dev_ethtool) because the device reference is retrieved from within the rtnl lock section there. Once dismantle started, the net device is unlisted and no reference will be found. | |||||
| CVE-2024-24855 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 5.0 MEDIUM |
| A race condition was found in the Linux kernel's scsi device driver in lpfc_unregister_fcf_rescan() function. This can result in a null pointer dereference issue, possibly leading to a kernel panic or denial of service issue. | |||||
| CVE-2015-1325 | 1 Canonical | 1 Ubuntu Linux | 2025-11-03 | 6.9 MEDIUM | 7.0 HIGH |
| Race condition in Apport before 2.17.2-0ubuntu1.1 as packaged in Ubuntu 15.04, before 2.14.70ubuntu8.5 as packaged in Ubuntu 14.10, before 2.14.1-0ubuntu3.11 as packaged in Ubuntu 14.04 LTS, and before 2.0.1-0ubuntu17.9 as packaged in Ubuntu 12.04 LTS allow local users to write to arbitrary files and gain root privileges. | |||||
| CVE-2025-22115 | 1 Linux | 1 Linux Kernel | 2025-11-03 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix block group refcount race in btrfs_create_pending_block_groups() Block group creation is done in two phases, which results in a slightly unintuitive property: a block group can be allocated/deallocated from after btrfs_make_block_group() adds it to the space_info with btrfs_add_bg_to_space_info(), but before creation is completely completed in btrfs_create_pending_block_groups(). As a result, it is possible for a block group to go unused and have 'btrfs_mark_bg_unused' called on it concurrently with 'btrfs_create_pending_block_groups'. This causes a number of issues, which were fixed with the block group flag 'BLOCK_GROUP_FLAG_NEW'. However, this fix is not quite complete. Since it does not use the unused_bg_lock, it is possible for the following race to occur: btrfs_create_pending_block_groups btrfs_mark_bg_unused if list_empty // false list_del_init clear_bit else if (test_bit) // true list_move_tail And we get into the exact same broken ref count and invalid new_bgs state for transaction cleanup that BLOCK_GROUP_FLAG_NEW was designed to prevent. The broken refcount aspect will result in a warning like: [1272.943527] refcount_t: underflow; use-after-free. [1272.943967] WARNING: CPU: 1 PID: 61 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110 [1272.944731] Modules linked in: btrfs virtio_net xor zstd_compress raid6_pq null_blk [last unloaded: btrfs] [1272.945550] CPU: 1 UID: 0 PID: 61 Comm: kworker/u32:1 Kdump: loaded Tainted: G W 6.14.0-rc5+ #108 [1272.946368] Tainted: [W]=WARN [1272.946585] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [1272.947273] Workqueue: btrfs_discard btrfs_discard_workfn [btrfs] [1272.947788] RIP: 0010:refcount_warn_saturate+0xba/0x110 [1272.949532] RSP: 0018:ffffbf1200247df0 EFLAGS: 00010282 [1272.949901] RAX: 0000000000000000 RBX: ffffa14b00e3f800 RCX: 0000000000000000 [1272.950437] RDX: 0000000000000000 RSI: ffffbf1200247c78 RDI: 00000000ffffdfff [1272.950986] RBP: ffffa14b00dc2860 R08: 00000000ffffdfff R09: ffffffff90526268 [1272.951512] R10: ffffffff904762c0 R11: 0000000063666572 R12: ffffa14b00dc28c0 [1272.952024] R13: 0000000000000000 R14: ffffa14b00dc2868 R15: 000001285dcd12c0 [1272.952850] FS: 0000000000000000(0000) GS:ffffa14d33c40000(0000) knlGS:0000000000000000 [1272.953458] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1272.953931] CR2: 00007f838cbda000 CR3: 000000010104e000 CR4: 00000000000006f0 [1272.954474] Call Trace: [1272.954655] <TASK> [1272.954812] ? refcount_warn_saturate+0xba/0x110 [1272.955173] ? __warn.cold+0x93/0xd7 [1272.955487] ? refcount_warn_saturate+0xba/0x110 [1272.955816] ? report_bug+0xe7/0x120 [1272.956103] ? handle_bug+0x53/0x90 [1272.956424] ? exc_invalid_op+0x13/0x60 [1272.956700] ? asm_exc_invalid_op+0x16/0x20 [1272.957011] ? refcount_warn_saturate+0xba/0x110 [1272.957399] btrfs_discard_cancel_work.cold+0x26/0x2b [btrfs] [1272.957853] btrfs_put_block_group.cold+0x5d/0x8e [btrfs] [1272.958289] btrfs_discard_workfn+0x194/0x380 [btrfs] [1272.958729] process_one_work+0x130/0x290 [1272.959026] worker_thread+0x2ea/0x420 [1272.959335] ? __pfx_worker_thread+0x10/0x10 [1272.959644] kthread+0xd7/0x1c0 [1272.959872] ? __pfx_kthread+0x10/0x10 [1272.960172] ret_from_fork+0x30/0x50 [1272.960474] ? __pfx_kthread+0x10/0x10 [1272.960745] ret_from_fork_asm+0x1a/0x30 [1272.961035] </TASK> [1272.961238] ---[ end trace 0000000000000000 ]--- Though we have seen them in the async discard workfn as well. It is most likely to happen after a relocation finishes which cancels discard, tears down the block group, etc. Fix this fully by taking the lock arou ---truncated--- | |||||
| CVE-2025-21895 | 1 Linux | 1 Linux Kernel | 2025-10-31 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Order the PMU list to fix warning about unordered pmu_ctx_list Syskaller triggers a warning due to prev_epc->pmu != next_epc->pmu in perf_event_swap_task_ctx_data(). vmcore shows that two lists have the same perf_event_pmu_context, but not in the same order. The problem is that the order of pmu_ctx_list for the parent is impacted by the time when an event/PMU is added. While the order for a child is impacted by the event order in the pinned_groups and flexible_groups. So the order of pmu_ctx_list in the parent and child may be different. To fix this problem, insert the perf_event_pmu_context to its proper place after iteration of the pmu_ctx_list. The follow testcase can trigger above warning: # perf record -e cycles --call-graph lbr -- taskset -c 3 ./a.out & # perf stat -e cpu-clock,cs -p xxx // xxx is the pid of a.out test.c void main() { int count = 0; pid_t pid; printf("%d running\n", getpid()); sleep(30); printf("running\n"); pid = fork(); if (pid == -1) { printf("fork error\n"); return; } if (pid == 0) { while (1) { count++; } } else { while (1) { count++; } } } The testcase first opens an LBR event, so it will allocate task_ctx_data, and then open tracepoint and software events, so the parent context will have 3 different perf_event_pmu_contexts. On inheritance, child ctx will insert the perf_event_pmu_context in another order and the warning will trigger. [ mingo: Tidied up the changelog. ] | |||||
| CVE-2025-59193 | 1 Microsoft | 11 Windows 10 1809, Windows 10 21h2, Windows 10 22h2 and 8 more | 2025-10-31 | N/A | 7.0 HIGH |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Management Services allows an authorized attacker to elevate privileges locally. | |||||
| CVE-2025-11637 | 1 Furbo | 2 Furbo 360 Dog Camera, Furbo 360 Dog Camera Firmware | 2025-10-30 | 4.0 MEDIUM | 4.3 MEDIUM |
| A vulnerability was detected in Tomofun Furbo 360 up to FB0035_FW_036. Impacted is an unknown function of the component Audio Handler. Performing manipulation results in race condition. The attack is possible to be carried out remotely. The vendor was contacted early about this disclosure but did not respond in any way. | |||||
| CVE-2022-26904 | 1 Microsoft | 17 Windows 10 1507, Windows 10 1607, Windows 10 1809 and 14 more | 2025-10-30 | 4.4 MEDIUM | 7.0 HIGH |
| Windows User Profile Service Elevation of Privilege Vulnerability | |||||
| CVE-2025-59195 | 1 Microsoft | 11 Windows 10 1809, Windows 10 21h2, Windows 10 22h2 and 8 more | 2025-10-30 | N/A | 7.0 HIGH |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Microsoft Graphics Component allows an authorized attacker to deny service locally. | |||||
| CVE-2025-59196 | 1 Microsoft | 16 Windows 10 1507, Windows 10 1607, Windows 10 1809 and 13 more | 2025-10-30 | N/A | 7.0 HIGH |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows SSDP Service allows an authorized attacker to elevate privileges locally. | |||||
| CVE-2021-25394 | 1 Samsung | 1 Android | 2025-10-30 | 4.4 MEDIUM | 6.4 MEDIUM |
| A use after free vulnerability via race condition in MFC charger driver prior to SMR MAY-2021 Release 1 allows arbitrary write given a radio privilege is compromised. | |||||
| CVE-2021-25395 | 1 Samsung | 1 Android | 2025-10-30 | 4.4 MEDIUM | 6.4 MEDIUM |
| A race condition in MFC charger driver prior to SMR MAY-2021 Release 1 allows local attackers to bypass signature check given a radio privilege is compromised. | |||||
| CVE-2025-21892 | 1 Linux | 1 Linux Kernel | 2025-10-29 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix the recovery flow of the UMR QP This patch addresses an issue in the recovery flow of the UMR QP, ensuring tasks do not get stuck, as highlighted by the call trace [1]. During recovery, before transitioning the QP to the RESET state, the software must wait for all outstanding WRs to complete. Failing to do so can cause the firmware to skip sending some flushed CQEs with errors and simply discard them upon the RESET, as per the IB specification. This race condition can result in lost CQEs and tasks becoming stuck. To resolve this, the patch sends a final WR which serves only as a barrier before moving the QP state to RESET. Once a CQE is received for that final WR, it guarantees that no outstanding WRs remain, making it safe to transition the QP to RESET and subsequently back to RTS, restoring proper functionality. Note: For the barrier WR, we simply reuse the failed and ready WR. Since the QP is in an error state, it will only receive IB_WC_WR_FLUSH_ERR. However, as it serves only as a barrier we don't care about its status. [1] INFO: task rdma_resource_l:1922 blocked for more than 120 seconds. Tainted: G W 6.12.0-rc7+ #1626 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:rdma_resource_l state:D stack:0 pid:1922 tgid:1922 ppid:1369 flags:0x00004004 Call Trace: <TASK> __schedule+0x420/0xd30 schedule+0x47/0x130 schedule_timeout+0x280/0x300 ? mark_held_locks+0x48/0x80 ? lockdep_hardirqs_on_prepare+0xe5/0x1a0 wait_for_completion+0x75/0x130 mlx5r_umr_post_send_wait+0x3c2/0x5b0 [mlx5_ib] ? __pfx_mlx5r_umr_done+0x10/0x10 [mlx5_ib] mlx5r_umr_revoke_mr+0x93/0xc0 [mlx5_ib] __mlx5_ib_dereg_mr+0x299/0x520 [mlx5_ib] ? _raw_spin_unlock_irq+0x24/0x40 ? wait_for_completion+0xfe/0x130 ? rdma_restrack_put+0x63/0xe0 [ib_core] ib_dereg_mr_user+0x5f/0x120 [ib_core] ? lock_release+0xc6/0x280 destroy_hw_idr_uobject+0x1d/0x60 [ib_uverbs] uverbs_destroy_uobject+0x58/0x1d0 [ib_uverbs] uobj_destroy+0x3f/0x70 [ib_uverbs] ib_uverbs_cmd_verbs+0x3e4/0xbb0 [ib_uverbs] ? __pfx_uverbs_destroy_def_handler+0x10/0x10 [ib_uverbs] ? __lock_acquire+0x64e/0x2080 ? mark_held_locks+0x48/0x80 ? find_held_lock+0x2d/0xa0 ? lock_acquire+0xc1/0x2f0 ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] ? __fget_files+0xc3/0x1b0 ib_uverbs_ioctl+0xe7/0x170 [ib_uverbs] ? ib_uverbs_ioctl+0xcb/0x170 [ib_uverbs] __x64_sys_ioctl+0x1b0/0xa70 do_syscall_64+0x6b/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f99c918b17b RSP: 002b:00007ffc766d0468 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffc766d0578 RCX: 00007f99c918b17b RDX: 00007ffc766d0560 RSI: 00000000c0181b01 RDI: 0000000000000003 RBP: 00007ffc766d0540 R08: 00007f99c8f99010 R09: 000000000000bd7e R10: 00007f99c94c1c70 R11: 0000000000000246 R12: 00007ffc766d0530 R13: 000000000000001c R14: 0000000040246a80 R15: 0000000000000000 </TASK> | |||||
| CVE-2025-21732 | 1 Linux | 1 Linux Kernel | 2025-10-28 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix a race for an ODP MR which leads to CQE with error This patch addresses a race condition for an ODP MR that can result in a CQE with an error on the UMR QP. During the __mlx5_ib_dereg_mr() flow, the following sequence of calls occurs: mlx5_revoke_mr() mlx5r_umr_revoke_mr() mlx5r_umr_post_send_wait() At this point, the lkey is freed from the hardware's perspective. However, concurrently, mlx5_ib_invalidate_range() might be triggered by another task attempting to invalidate a range for the same freed lkey. This task will: - Acquire the umem_odp->umem_mutex lock. - Call mlx5r_umr_update_xlt() on the UMR QP. - Since the lkey has already been freed, this can lead to a CQE error, causing the UMR QP to enter an error state [1]. To resolve this race condition, the umem_odp->umem_mutex lock is now also acquired as part of the mlx5_revoke_mr() scope. Upon successful revoke, we set umem_odp->private which points to that MR to NULL, preventing any further invalidation attempts on its lkey. [1] From dmesg: infiniband rocep8s0f0: dump_cqe:277:(pid 0): WC error: 6, Message: memory bind operation error cqe_dump: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 cqe_dump: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 cqe_dump: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 cqe_dump: 00000030: 00 00 00 00 08 00 78 06 25 00 11 b9 00 0e dd d2 WARNING: CPU: 15 PID: 1506 at drivers/infiniband/hw/mlx5/umr.c:394 mlx5r_umr_post_send_wait+0x15a/0x2b0 [mlx5_ib] Modules linked in: ip6table_mangle ip6table_natip6table_filter ip6_tables iptable_mangle xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm mlx5_ib ib_uverbs ib_core fuse mlx5_core CPU: 15 UID: 0 PID: 1506 Comm: ibv_rc_pingpong Not tainted 6.12.0-rc7+ #1626 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5r_umr_post_send_wait+0x15a/0x2b0 [mlx5_ib] [..] Call Trace: <TASK> mlx5r_umr_update_xlt+0x23c/0x3e0 [mlx5_ib] mlx5_ib_invalidate_range+0x2e1/0x330 [mlx5_ib] __mmu_notifier_invalidate_range_start+0x1e1/0x240 zap_page_range_single+0xf1/0x1a0 madvise_vma_behavior+0x677/0x6e0 do_madvise+0x1a2/0x4b0 __x64_sys_madvise+0x25/0x30 do_syscall_64+0x6b/0x140 entry_SYSCALL_64_after_hwframe+0x76/0x7e | |||||
| CVE-2023-52934 | 1 Linux | 1 Linux Kernel | 2025-10-28 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mm/MADV_COLLAPSE: catch !none !huge !bad pmd lookups In commit 34488399fa08 ("mm/madvise: add file and shmem support to MADV_COLLAPSE") we make the following change to find_pmd_or_thp_or_none(): - if (!pmd_present(pmde)) - return SCAN_PMD_NULL; + if (pmd_none(pmde)) + return SCAN_PMD_NONE; This was for-use by MADV_COLLAPSE file/shmem codepaths, where MADV_COLLAPSE might identify a pte-mapped hugepage, only to have khugepaged race-in, free the pte table, and clear the pmd. Such codepaths include: A) If we find a suitably-aligned compound page of order HPAGE_PMD_ORDER already in the pagecache. B) In retract_page_tables(), if we fail to grab mmap_lock for the target mm/address. In these cases, collapse_pte_mapped_thp() really does expect a none (not just !present) pmd, and we want to suitably identify that case separate from the case where no pmd is found, or it's a bad-pmd (of course, many things could happen once we drop mmap_lock, and the pmd could plausibly undergo multiple transitions due to intervening fault, split, etc). Regardless, the code is prepared install a huge-pmd only when the existing pmd entry is either a genuine pte-table-mapping-pmd, or the none-pmd. However, the commit introduces a logical hole; namely, that we've allowed !none- && !huge- && !bad-pmds to be classified as genuine pte-table-mapping-pmds. One such example that could leak through are swap entries. The pmd values aren't checked again before use in pte_offset_map_lock(), which is expecting nothing less than a genuine pte-table-mapping-pmd. We want to put back the !pmd_present() check (below the pmd_none() check), but need to be careful to deal with subtleties in pmd transitions and treatments by various arch. The issue is that __split_huge_pmd_locked() temporarily clears the present bit (or otherwise marks the entry as invalid), but pmd_present() and pmd_trans_huge() still need to return true while the pmd is in this transitory state. For example, x86's pmd_present() also checks the _PAGE_PSE , riscv's version also checks the _PAGE_LEAF bit, and arm64 also checks a PMD_PRESENT_INVALID bit. Covering all 4 cases for x86 (all checks done on the same pmd value): 1) pmd_present() && pmd_trans_huge() All we actually know here is that the PSE bit is set. Either: a) We aren't racing with __split_huge_page(), and PRESENT or PROTNONE is set. => huge-pmd b) We are currently racing with __split_huge_page(). The danger here is that we proceed as-if we have a huge-pmd, but really we are looking at a pte-mapping-pmd. So, what is the risk of this danger? The only relevant path is: madvise_collapse() -> collapse_pte_mapped_thp() Where we might just incorrectly report back "success", when really the memory isn't pmd-backed. This is fine, since split could happen immediately after (actually) successful madvise_collapse(). So, it should be safe to just assume huge-pmd here. 2) pmd_present() && !pmd_trans_huge() Either: a) PSE not set and either PRESENT or PROTNONE is. => pte-table-mapping pmd (or PROT_NONE) b) devmap. This routine can be called immediately after unlocking/locking mmap_lock -- or called with no locks held (see khugepaged_scan_mm_slot()), so previous VMA checks have since been invalidated. 3) !pmd_present() && pmd_trans_huge() Not possible. 4) !pmd_present() && !pmd_trans_huge() Neither PRESENT nor PROTNONE set => not present I've checked all archs that implement pmd_trans_huge() (arm64, riscv, powerpc, longarch, x86, mips, s390) and this logic roughly translates (though devmap treatment is unique to x86 and powerpc, and (3) doesn't necessarily hold in general -- but that doesn't matter since !pmd_present() always takes failure path). Also, add a comment above find_pmd_or_thp_or_none() ---truncated--- | |||||
| CVE-2023-36884 | 1 Microsoft | 12 Windows 10 1507, Windows 10 1607, Windows 10 1809 and 9 more | 2025-10-28 | N/A | 7.5 HIGH |
| Windows Search Remote Code Execution Vulnerability | |||||
| CVE-2025-59282 | 1 Microsoft | 16 Windows 10 1507, Windows 10 1607, Windows 10 1809 and 13 more | 2025-10-27 | N/A | 7.0 HIGH |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Inbox COM Objects allows an unauthorized attacker to execute code locally. | |||||
| CVE-2025-55687 | 1 Microsoft | 15 Windows 10 1507, Windows 10 1607, Windows 10 1809 and 12 more | 2025-10-27 | N/A | 7.4 HIGH |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Resilient File System (ReFS) allows an unauthorized attacker to elevate privileges locally. | |||||
| CVE-2025-55328 | 1 Microsoft | 14 Windows 10 1507, Windows 10 1607, Windows 10 1809 and 11 more | 2025-10-27 | N/A | 7.8 HIGH |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Hyper-V allows an authorized attacker to elevate privileges locally. | |||||
| CVE-2025-55335 | 1 Microsoft | 16 Windows 10 1507, Windows 10 1607, Windows 10 1809 and 13 more | 2025-10-27 | N/A | 7.4 HIGH |
| Use after free in Windows NTFS allows an unauthorized attacker to elevate privileges locally. | |||||