Total
332897 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2026-22979 | 2026-01-26 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: net: fix memory leak in skb_segment_list for GRO packets When skb_segment_list() is called during packet forwarding, it handles packets that were aggregated by the GRO engine. Historically, the segmentation logic in skb_segment_list assumes that individual segments are split from a parent SKB and may need to carry their own socket memory accounting. Accordingly, the code transfers truesize from the parent to the newly created segments. Prior to commit ed4cccef64c1 ("gro: fix ownership transfer"), this truesize subtraction in skb_segment_list() was valid because fragments still carry a reference to the original socket. However, commit ed4cccef64c1 ("gro: fix ownership transfer") changed this behavior by ensuring that fraglist entries are explicitly orphaned (skb->sk = NULL) to prevent illegal orphaning later in the stack. This change meant that the entire socket memory charge remained with the head SKB, but the corresponding accounting logic in skb_segment_list() was never updated. As a result, the current code unconditionally adds each fragment's truesize to delta_truesize and subtracts it from the parent SKB. Since the fragments are no longer charged to the socket, this subtraction results in an effective under-count of memory when the head is freed. This causes sk_wmem_alloc to remain non-zero, preventing socket destruction and leading to a persistent memory leak. The leak can be observed via KMEMLEAK when tearing down the networking environment: unreferenced object 0xffff8881e6eb9100 (size 2048): comm "ping", pid 6720, jiffies 4295492526 backtrace: kmem_cache_alloc_noprof+0x5c6/0x800 sk_prot_alloc+0x5b/0x220 sk_alloc+0x35/0xa00 inet6_create.part.0+0x303/0x10d0 __sock_create+0x248/0x640 __sys_socket+0x11b/0x1d0 Since skb_segment_list() is exclusively used for SKB_GSO_FRAGLIST packets constructed by GRO, the truesize adjustment is removed. The call to skb_release_head_state() must be preserved. As documented in commit cf673ed0e057 ("net: fix fraglist segmentation reference count leak"), it is still required to correctly drop references to SKB extensions that may be overwritten during __copy_skb_header(). | |||||
| CVE-2026-22271 | 2026-01-26 | N/A | 7.5 HIGH | ||
| Dell ECS, versions 3.8.1.0 through 3.8.1.7, and Dell ObjectScale versions prior to 4.2.0.0, contains a Cleartext Transmission of Sensitive Information vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to information exposure. | |||||
| CVE-2025-15061 | 2026-01-26 | N/A | 9.8 CRITICAL | ||
| Framelink Figma MCP Server fetchWithRetry Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Framelink Figma MCP Server. Authentication is not required to exploit this vulnerability. The specific flaw exists within the implementation of the fetchWithRetry method. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the service account. Was ZDI-CAN-27877. | |||||
| CVE-2025-71160 | 2026-01-26 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: avoid chain re-validation if possible Hamza Mahfooz reports cpu soft lock-ups in nft_chain_validate(): watchdog: BUG: soft lockup - CPU#1 stuck for 27s! [iptables-nft-re:37547] [..] RIP: 0010:nft_chain_validate+0xcb/0x110 [nf_tables] [..] nft_immediate_validate+0x36/0x50 [nf_tables] nft_chain_validate+0xc9/0x110 [nf_tables] nft_immediate_validate+0x36/0x50 [nf_tables] nft_chain_validate+0xc9/0x110 [nf_tables] nft_immediate_validate+0x36/0x50 [nf_tables] nft_chain_validate+0xc9/0x110 [nf_tables] nft_immediate_validate+0x36/0x50 [nf_tables] nft_chain_validate+0xc9/0x110 [nf_tables] nft_immediate_validate+0x36/0x50 [nf_tables] nft_chain_validate+0xc9/0x110 [nf_tables] nft_immediate_validate+0x36/0x50 [nf_tables] nft_chain_validate+0xc9/0x110 [nf_tables] nft_table_validate+0x6b/0xb0 [nf_tables] nf_tables_validate+0x8b/0xa0 [nf_tables] nf_tables_commit+0x1df/0x1eb0 [nf_tables] [..] Currently nf_tables will traverse the entire table (chain graph), starting from the entry points (base chains), exploring all possible paths (chain jumps). But there are cases where we could avoid revalidation. Consider: 1 input -> j2 -> j3 2 input -> j2 -> j3 3 input -> j1 -> j2 -> j3 Then the second rule does not need to revalidate j2, and, by extension j3, because this was already checked during validation of the first rule. We need to validate it only for rule 3. This is needed because chain loop detection also ensures we do not exceed the jump stack: Just because we know that j2 is cycle free, its last jump might now exceed the allowed stack size. We also need to update all reachable chains with the new largest observed call depth. Care has to be taken to revalidate even if the chain depth won't be an issue: chain validation also ensures that expressions are not called from invalid base chains. For example, the masquerade expression can only be called from NAT postrouting base chains. Therefore we also need to keep record of the base chain context (type, hooknum) and revalidate if the chain becomes reachable from a different hook location. | |||||
| CVE-2024-11976 | 2026-01-26 | N/A | 7.3 HIGH | ||
| The The BuddyPress plugin for WordPress is vulnerable to arbitrary shortcode execution in all versions up to, and including, 14.3.3. This is due to the software allowing users to execute an action that does not properly validate a value before running do_shortcode. This makes it possible for unauthenticated attackers to execute arbitrary shortcodes. | |||||
| CVE-2026-0769 | 2026-01-26 | N/A | 9.8 CRITICAL | ||
| Langflow eval_custom_component_code Eval Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Langflow. Authentication is not required to exploit this vulnerability. The specific flaw exists within the implementation of eval_custom_component_code function. The issue results from the lack of proper validation of a user-supplied string before using it to execute python code. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-26972. | |||||
| CVE-2026-22274 | 2026-01-26 | N/A | 6.5 MEDIUM | ||
| Dell ECS, versions 3.8.1.0 through 3.8.1.7, and Dell ObjectScale versions prior to 4.2.0.0, contains a Cleartext Transmission of Sensitive Information vulnerability in the Fabric Syslog. An unauthenticated attacker with remote access could potentially exploit this vulnerability to intercept and modify information in transit. | |||||
| CVE-2025-71156 | 2026-01-26 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: gve: defer interrupt enabling until NAPI registration Currently, interrupts are automatically enabled immediately upon request. This allows interrupt to fire before the associated NAPI context is fully initialized and cause failures like below: [ 0.946369] Call Trace: [ 0.946369] <IRQ> [ 0.946369] __napi_poll+0x2a/0x1e0 [ 0.946369] net_rx_action+0x2f9/0x3f0 [ 0.946369] handle_softirqs+0xd6/0x2c0 [ 0.946369] ? handle_edge_irq+0xc1/0x1b0 [ 0.946369] __irq_exit_rcu+0xc3/0xe0 [ 0.946369] common_interrupt+0x81/0xa0 [ 0.946369] </IRQ> [ 0.946369] <TASK> [ 0.946369] asm_common_interrupt+0x22/0x40 [ 0.946369] RIP: 0010:pv_native_safe_halt+0xb/0x10 Use the `IRQF_NO_AUTOEN` flag when requesting interrupts to prevent auto enablement and explicitly enable the interrupt in NAPI initialization path (and disable it during NAPI teardown). This ensures that interrupt lifecycle is strictly coupled with readiness of NAPI context. | |||||
| CVE-2025-41083 | 2026-01-26 | N/A | N/A | ||
| Vulnerability in Altitude Authentication Service and Altitude Communication Server v8.5.3290.0 by Altitude, where manipulation of Host header in HTTP requests allows redirection to an arbitrary URL or modification of the base URL to trick the victim into sending login credentials to a malicious website. This behavior can be used to redirect clients to endpoints controlled by the attacker. | |||||
| CVE-2026-23004 | 2026-01-26 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: dst: fix races in rt6_uncached_list_del() and rt_del_uncached_list() syzbot was able to crash the kernel in rt6_uncached_list_flush_dev() in an interesting way [1] Crash happens in list_del_init()/INIT_LIST_HEAD() while writing list->prev, while the prior write on list->next went well. static inline void INIT_LIST_HEAD(struct list_head *list) { WRITE_ONCE(list->next, list); // This went well WRITE_ONCE(list->prev, list); // Crash, @list has been freed. } Issue here is that rt6_uncached_list_del() did not attempt to lock ul->lock, as list_empty(&rt->dst.rt_uncached) returned true because the WRITE_ONCE(list->next, list) happened on the other CPU. We might use list_del_init_careful() and list_empty_careful(), or make sure rt6_uncached_list_del() always grabs the spinlock whenever rt->dst.rt_uncached_list has been set. A similar fix is neeed for IPv4. [1] BUG: KASAN: slab-use-after-free in INIT_LIST_HEAD include/linux/list.h:46 [inline] BUG: KASAN: slab-use-after-free in list_del_init include/linux/list.h:296 [inline] BUG: KASAN: slab-use-after-free in rt6_uncached_list_flush_dev net/ipv6/route.c:191 [inline] BUG: KASAN: slab-use-after-free in rt6_disable_ip+0x633/0x730 net/ipv6/route.c:5020 Write of size 8 at addr ffff8880294cfa78 by task kworker/u8:14/3450 CPU: 0 UID: 0 PID: 3450 Comm: kworker/u8:14 Tainted: G L syzkaller #0 PREEMPT_{RT,(full)} Tainted: [L]=SOFTLOCKUP Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 Workqueue: netns cleanup_net Call Trace: <TASK> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xca/0x240 mm/kasan/report.c:482 kasan_report+0x118/0x150 mm/kasan/report.c:595 INIT_LIST_HEAD include/linux/list.h:46 [inline] list_del_init include/linux/list.h:296 [inline] rt6_uncached_list_flush_dev net/ipv6/route.c:191 [inline] rt6_disable_ip+0x633/0x730 net/ipv6/route.c:5020 addrconf_ifdown+0x143/0x18a0 net/ipv6/addrconf.c:3853 addrconf_notify+0x1bc/0x1050 net/ipv6/addrconf.c:-1 notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85 call_netdevice_notifiers_extack net/core/dev.c:2268 [inline] call_netdevice_notifiers net/core/dev.c:2282 [inline] netif_close_many+0x29c/0x410 net/core/dev.c:1785 unregister_netdevice_many_notify+0xb50/0x2330 net/core/dev.c:12353 ops_exit_rtnl_list net/core/net_namespace.c:187 [inline] ops_undo_list+0x3dc/0x990 net/core/net_namespace.c:248 cleanup_net+0x4de/0x7b0 net/core/net_namespace.c:696 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:246 </TASK> Allocated by task 803: kasan_save_stack mm/kasan/common.c:57 [inline] kasan_save_track+0x3e/0x80 mm/kasan/common.c:78 unpoison_slab_object mm/kasan/common.c:340 [inline] __kasan_slab_alloc+0x6c/0x80 mm/kasan/common.c:366 kasan_slab_alloc include/linux/kasan.h:253 [inline] slab_post_alloc_hook mm/slub.c:4953 [inline] slab_alloc_node mm/slub.c:5263 [inline] kmem_cache_alloc_noprof+0x18d/0x6c0 mm/slub.c:5270 dst_alloc+0x105/0x170 net/core/dst.c:89 ip6_dst_alloc net/ipv6/route.c:342 [inline] icmp6_dst_alloc+0x75/0x460 net/ipv6/route.c:3333 mld_sendpack+0x683/0xe60 net/ipv6/mcast.c:1844 mld_send_cr net/ipv6/mcast.c:2154 [inline] mld_ifc_work+0x83e/0xd60 net/ipv6/mcast.c:2693 process_one_work kernel/workqueue.c:3257 [inline] process_scheduled_works+0xad1/0x1770 kernel/workqueue.c:3340 worker_thread+0x8a0/0xda0 kernel/workqueue.c:3421 kthread+0x711/0x8a0 kernel/kthread.c:463 ret_from_fork+0x510/0xa50 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entr ---truncated--- | |||||
| CVE-2025-59094 | 2026-01-26 | N/A | N/A | ||
| A local privilege escalation vulnerability has been identified in the Kaba exos 9300 System management application (d9sysdef.exe). Within this application it is possible to specify an arbitrary executable as well as the weekday and start time, when the specified executable should be run with SYSTEM privileges. | |||||
| CVE-2026-1425 | 2026-01-26 | 5.1 MEDIUM | 5.6 MEDIUM | ||
| A security flaw has been discovered in pymumu SmartDNS up to 47.1. This vulnerability affects the function _dns_decode_rr_head/_dns_decode_SVCB_HTTPS of the file src/dns.c of the component SVBC Record Parser. The manipulation results in stack-based buffer overflow. It is possible to launch the attack remotely. A high complexity level is associated with this attack. It is stated that the exploitability is difficult. The patch is identified as 2d57c4b4e1add9b4537aeb403f794a084727e1c8. Applying a patch is advised to resolve this issue. | |||||
| CVE-2026-0862 | 2026-01-26 | N/A | 6.1 MEDIUM | ||
| The Save as PDF Plugin by PDFCrowd plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the ‘options’ parameter in all versions up to, and including, 4.5.5 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. NOTE: Successful exploitation of this vulnerability requires that the PDFCrowd API key is blank (also known as "demo mode", which is the default configuration when the plugin is installed) or known. | |||||
| CVE-2025-59093 | 2026-01-26 | N/A | N/A | ||
| Exos 9300 instances are using a randomly generated database password to connect to the configured MSSQL server. The password is derived from static random values, which are concatenated to the hostname and a random string that can be read by every user from the registry. This allows an attacker to derive the database password and get authenticated access to the central exos 9300 database as the user Exos9300Common. The user has the roles ExosDialog and ExosDialogDotNet assigned, which are able to read most tables of the database as well as update and insert into many tables. | |||||
| CVE-2025-59091 | 2026-01-26 | N/A | N/A | ||
| Multiple hardcoded credentials have been identified, which are allowed to sign-in to the exos 9300 datapoint server running on port 1004 and 1005. This server is used for relaying status information from and to the Access Managers. This information, among other things, is used to graphically visualize open doors and alerts. However, controlling the Access Managers via this interface is also possible. To send and receive status information, authentication is necessary. The Kaba exos 9300 application contains hard-coded credentials for four different users, which are allowed to login to the datapoint server and receive as well as send information, including commands to open arbitrary doors. | |||||
| CVE-2026-22988 | 2026-01-26 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: arp: do not assume dev_hard_header() does not change skb->head arp_create() is the only dev_hard_header() caller making assumption about skb->head being unchanged. A recent commit broke this assumption. Initialize @arp pointer after dev_hard_header() call. | |||||
| CVE-2025-15516 | 2026-01-26 | N/A | 4.3 MEDIUM | ||
| The All-in-One Video Gallery plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the ajax_callback_store_user_meta() function in versions 4.1.0 to 4.6.4. This makes it possible for authenticated attackers, with Subscriber-level access and above, to update arbitrary string-based user meta keys for their own account. | |||||
| CVE-2025-14903 | 2026-01-26 | N/A | 4.3 MEDIUM | ||
| The Simple Crypto Shortcodes plugin for WordPress is vulnerable to Cross-Site Request Forgery in versions up to, and including, 1.0.2. This is due to missing nonce validation on the scs_backend function. This makes it possible for unauthenticated attackers to update plugin settings via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. | |||||
| CVE-2026-1099 | 2026-01-26 | N/A | 6.4 MEDIUM | ||
| The Administrative Shortcodes plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'login' and 'logout' shortcode attributes in all versions up to, and including, 0.3.4 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | |||||
| CVE-2026-23013 | 2026-01-26 | N/A | N/A | ||
| In the Linux kernel, the following vulnerability has been resolved: net: octeon_ep_vf: fix free_irq dev_id mismatch in IRQ rollback octep_vf_request_irqs() requests MSI-X queue IRQs with dev_id set to ioq_vector. If request_irq() fails part-way, the rollback loop calls free_irq() with dev_id set to 'oct', which does not match the original dev_id and may leave the irqaction registered. This can keep IRQ handlers alive while ioq_vector is later freed during unwind/teardown, leading to a use-after-free or crash when an interrupt fires. Fix the error path to free IRQs with the same ioq_vector dev_id used during request_irq(). | |||||