Total
15057 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2021-46959 | 1 Linux | 1 Linux Kernel | 2024-12-10 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: spi: Fix use-after-free with devm_spi_alloc_* We can't rely on the contents of the devres list during spi_unregister_controller(), as the list is already torn down at the time we perform devres_find() for devm_spi_release_controller. This causes devices registered with devm_spi_alloc_{master,slave}() to be mistakenly identified as legacy, non-devm managed devices and have their reference counters decremented below 0. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 660 at lib/refcount.c:28 refcount_warn_saturate+0x108/0x174 [<b0396f04>] (refcount_warn_saturate) from [<b03c56a4>] (kobject_put+0x90/0x98) [<b03c5614>] (kobject_put) from [<b0447b4c>] (put_device+0x20/0x24) r4:b6700140 [<b0447b2c>] (put_device) from [<b07515e8>] (devm_spi_release_controller+0x3c/0x40) [<b07515ac>] (devm_spi_release_controller) from [<b045343c>] (release_nodes+0x84/0xc4) r5:b6700180 r4:b6700100 [<b04533b8>] (release_nodes) from [<b0454160>] (devres_release_all+0x5c/0x60) r8:b1638c54 r7:b117ad94 r6:b1638c10 r5:b117ad94 r4:b163dc10 [<b0454104>] (devres_release_all) from [<b044e41c>] (__device_release_driver+0x144/0x1ec) r5:b117ad94 r4:b163dc10 [<b044e2d8>] (__device_release_driver) from [<b044f70c>] (device_driver_detach+0x84/0xa0) r9:00000000 r8:00000000 r7:b117ad94 r6:b163dc54 r5:b1638c10 r4:b163dc10 [<b044f688>] (device_driver_detach) from [<b044d274>] (unbind_store+0xe4/0xf8) Instead, determine the devm allocation state as a flag on the controller which is guaranteed to be stable during cleanup. | |||||
| CVE-2021-47065 | 1 Linux | 1 Linux Kernel | 2024-12-10 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: rtw88: Fix array overrun in rtw_get_tx_power_params() Using a kernel with the Undefined Behaviour Sanity Checker (UBSAN) enabled, the following array overrun is logged: ================================================================================ UBSAN: array-index-out-of-bounds in /home/finger/wireless-drivers-next/drivers/net/wireless/realtek/rtw88/phy.c:1789:34 index 5 is out of range for type 'u8 [5]' CPU: 2 PID: 84 Comm: kworker/u16:3 Tainted: G O 5.12.0-rc5-00086-gd88bba47038e-dirty #651 Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.50 09/29/2014 Workqueue: phy0 ieee80211_scan_work [mac80211] Call Trace: dump_stack+0x64/0x7c ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds.cold+0x43/0x48 rtw_get_tx_power_params+0x83a/drivers/net/wireless/realtek/rtw88/0xad0 [rtw_core] ? rtw_pci_read16+0x20/0x20 [rtw_pci] ? check_hw_ready+0x50/0x90 [rtw_core] rtw_phy_get_tx_power_index+0x4d/0xd0 [rtw_core] rtw_phy_set_tx_power_level+0xee/0x1b0 [rtw_core] rtw_set_channel+0xab/0x110 [rtw_core] rtw_ops_config+0x87/0xc0 [rtw_core] ieee80211_hw_config+0x9d/0x130 [mac80211] ieee80211_scan_state_set_channel+0x81/0x170 [mac80211] ieee80211_scan_work+0x19f/0x2a0 [mac80211] process_one_work+0x1dd/0x3a0 worker_thread+0x49/0x330 ? rescuer_thread+0x3a0/0x3a0 kthread+0x134/0x150 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x30 ================================================================================ The statement where an array is being overrun is shown in the following snippet: if (rate <= DESC_RATE11M) tx_power = pwr_idx_2g->cck_base[group]; else ====> tx_power = pwr_idx_2g->bw40_base[group]; The associated arrays are defined in main.h as follows: struct rtw_2g_txpwr_idx { u8 cck_base[6]; u8 bw40_base[5]; struct rtw_2g_1s_pwr_idx_diff ht_1s_diff; struct rtw_2g_ns_pwr_idx_diff ht_2s_diff; struct rtw_2g_ns_pwr_idx_diff ht_3s_diff; struct rtw_2g_ns_pwr_idx_diff ht_4s_diff; }; The problem arises because the value of group is 5 for channel 14. The trivial increase in the dimension of bw40_base fails as this struct must match the layout of efuse. The fix is to add the rate as an argument to rtw_get_channel_group() and set the group for channel 14 to 4 if rate <= DESC_RATE11M. This patch fixes commit fa6dfe6bff24 ("rtw88: resolve order of tx power setting routines") | |||||
| CVE-2021-47058 | 1 Linux | 1 Linux Kernel | 2024-12-10 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: regmap: set debugfs_name to NULL after it is freed There is a upstream commit cffa4b2122f5("regmap:debugfs: Fix a memory leak when calling regmap_attach_dev") that adds a if condition when create name for debugfs_name. With below function invoking logical, debugfs_name is freed in regmap_debugfs_exit(), but it is not created again because of the if condition introduced by above commit. regmap_reinit_cache() regmap_debugfs_exit() ... regmap_debugfs_init() So, set debugfs_name to NULL after it is freed. | |||||
| CVE-2021-47054 | 1 Linux | 1 Linux Kernel | 2024-12-10 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bus: qcom: Put child node before return Put child node before return to fix potential reference count leak. Generally, the reference count of child is incremented and decremented automatically in the macro for_each_available_child_of_node() and should be decremented manually if the loop is broken in loop body. | |||||
| CVE-2021-47020 | 1 Linux | 1 Linux Kernel | 2024-12-10 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: soundwire: stream: fix memory leak in stream config error path When stream config is failed, master runtime will release all slave runtime in the slave_rt_list, but slave runtime is not added to the list at this time. This patch frees slave runtime in the config error path to fix the memory leak. | |||||
| CVE-2021-47059 | 1 Linux | 1 Linux Kernel | 2024-12-10 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: crypto: sun8i-ss - fix result memory leak on error path This patch fixes a memory leak on an error path. | |||||
| CVE-2021-47061 | 1 Linux | 1 Linux Kernel | 2024-12-10 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: KVM: Destroy I/O bus devices on unregister failure _after_ sync'ing SRCU If allocating a new instance of an I/O bus fails when unregistering a device, wait to destroy the device until after all readers are guaranteed to see the new null bus. Destroying devices before the bus is nullified could lead to use-after-free since readers expect the devices on their reference of the bus to remain valid. | |||||
| CVE-2021-47062 | 1 Linux | 1 Linux Kernel | 2024-12-10 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Use online_vcpus, not created_vcpus, to iterate over vCPUs Use the kvm_for_each_vcpu() helper to iterate over vCPUs when encrypting VMSAs for SEV, which effectively switches to use online_vcpus instead of created_vcpus. This fixes a possible null-pointer dereference as created_vcpus does not guarantee a vCPU exists, since it is updated at the very beginning of KVM_CREATE_VCPU. created_vcpus exists to allow the bulk of vCPU creation to run in parallel, while still correctly restricting the max number of max vCPUs. | |||||
| CVE-2021-47063 | 1 Linux | 1 Linux Kernel | 2024-12-10 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm: bridge/panel: Cleanup connector on bridge detach If we don't call drm_connector_cleanup() manually in panel_bridge_detach(), the connector will be cleaned up with the other DRM objects in the call to drm_mode_config_cleanup(). However, since our drm_connector is devm-allocated, by the time drm_mode_config_cleanup() will be called, our connector will be long gone. Therefore, the connector must be cleaned up when the bridge is detached to avoid use-after-free conditions. v2: Cleanup connector only if it was created v3: Add FIXME v4: (Use connector->dev) directly in if() block | |||||
| CVE-2024-42151 | 1 Linux | 1 Linux Kernel | 2024-12-09 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: bpf: mark bpf_dummy_struct_ops.test_1 parameter as nullable Test case dummy_st_ops/dummy_init_ret_value passes NULL as the first parameter of the test_1() function. Mark this parameter as nullable to make verifier aware of such possibility. Otherwise, NULL check in the test_1() code: SEC("struct_ops/test_1") int BPF_PROG(test_1, struct bpf_dummy_ops_state *state) { if (!state) return ...; ... access state ... } Might be removed by verifier, thus triggering NULL pointer dereference under certain conditions. | |||||
| CVE-2024-42150 | 1 Linux | 1 Linux Kernel | 2024-12-09 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: txgbe: remove separate irq request for MSI and INTx When using MSI or INTx interrupts, request_irq() for pdev->irq will conflict with request_threaded_irq() for txgbe->misc.irq, to cause system crash. So remove txgbe_request_irq() for MSI/INTx case, and rename txgbe_request_msix_irqs() since it only request for queue irqs. Add wx->misc_irq_domain to determine whether the driver creates an IRQ domain and threaded request the IRQs. | |||||
| CVE-2024-42149 | 1 Linux | 1 Linux Kernel | 2024-12-09 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fs: don't misleadingly warn during thaw operations The block device may have been frozen before it was claimed by a filesystem. Concurrently another process might try to mount that frozen block device and has temporarily claimed the block device for that purpose causing a concurrent fs_bdev_thaw() to end up here. The mounter is already about to abort mounting because they still saw an elevanted bdev->bd_fsfreeze_count so get_bdev_super() will return NULL in that case. For example, P1 calls dm_suspend() which calls into bdev_freeze() before the block device has been claimed by the filesystem. This brings bdev->bd_fsfreeze_count to 1 and no call into fs_bdev_freeze() is required. Now P2 tries to mount that frozen block device. It claims it and checks bdev->bd_fsfreeze_count. As it's elevated it aborts mounting. In the meantime P3 called dm_resume(). P3 sees that the block device is already claimed by a filesystem and calls into fs_bdev_thaw(). P3 takes a passive reference and realizes that the filesystem isn't ready yet. P3 puts itself to sleep to wait for the filesystem to become ready. P2 now puts the last active reference to the filesystem and marks it as dying. P3 gets woken, sees that the filesystem is dying and get_bdev_super() fails. | |||||
| CVE-2024-50263 | 1 Linux | 1 Linux Kernel | 2024-12-09 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: fork: only invoke khugepaged, ksm hooks if no error There is no reason to invoke these hooks early against an mm that is in an incomplete state. The change in commit d24062914837 ("fork: use __mt_dup() to duplicate maple tree in dup_mmap()") makes this more pertinent as we may be in a state where entries in the maple tree are not yet consistent. Their placement early in dup_mmap() only appears to have been meaningful for early error checking, and since functionally it'd require a very small allocation to fail (in practice 'too small to fail') that'd only occur in the most dire circumstances, meaning the fork would fail or be OOM'd in any case. Since both khugepaged and KSM tracking are there to provide optimisations to memory performance rather than critical functionality, it doesn't really matter all that much if, under such dire memory pressure, we fail to register an mm with these. As a result, we follow the example of commit d2081b2bf819 ("mm: khugepaged: make khugepaged_enter() void function") and make ksm_fork() a void function also. We only expose the mm to these functions once we are done with them and only if no error occurred in the fork operation. | |||||
| CVE-2021-47050 | 1 Linux | 1 Linux Kernel | 2024-12-09 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: memory: renesas-rpc-if: fix possible NULL pointer dereference of resource The platform_get_resource_byname() can return NULL which would be immediately dereferenced by resource_size(). Instead dereference it after validating the resource. Addresses-Coverity: Dereference null return value | |||||
| CVE-2021-47049 | 1 Linux | 1 Linux Kernel | 2024-12-09 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Use after free in __vmbus_open() The "open_info" variable is added to the &vmbus_connection.chn_msg_list, but the error handling frees "open_info" without removing it from the list. This will result in a use after free. First remove it from the list, and then free it. | |||||
| CVE-2021-47048 | 1 Linux | 1 Linux Kernel | 2024-12-09 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: spi: spi-zynqmp-gqspi: fix use-after-free in zynqmp_qspi_exec_op When handling op->addr, it is using the buffer "tmpbuf" which has been freed. This will trigger a use-after-free KASAN warning. Let's use temporary variables to store op->addr.val and op->cmd.opcode to fix this issue. | |||||
| CVE-2021-47046 | 1 Linux | 1 Linux Kernel | 2024-12-09 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix off by one in hdmi_14_process_transaction() The hdcp_i2c_offsets[] array did not have an entry for HDCP_MESSAGE_ID_WRITE_CONTENT_STREAM_TYPE so it led to an off by one read overflow. I added an entry and copied the 0x0 value for the offset from similar code in drivers/gpu/drm/amd/display/modules/hdcp/hdcp_ddc.c. I also declared several of these arrays as having HDCP_MESSAGE_ID_MAX entries. This doesn't change the code, but it's just a belt and suspenders approach to try future proof the code. | |||||
| CVE-2023-52475 | 1 Linux | 1 Linux Kernel | 2024-12-09 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: Input: powermate - fix use-after-free in powermate_config_complete syzbot has found a use-after-free bug [1] in the powermate driver. This happens when the device is disconnected, which leads to a memory free from the powermate_device struct. When an asynchronous control message completes after the kfree and its callback is invoked, the lock does not exist anymore and hence the bug. Use usb_kill_urb() on pm->config to cancel any in-progress requests upon device disconnection. [1] https://syzkaller.appspot.com/bug?extid=0434ac83f907a1dbdd1e | |||||
| CVE-2021-47053 | 1 Linux | 1 Linux Kernel | 2024-12-09 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: crypto: sun8i-ss - Fix memory leak of pad It appears there are several failure return paths that don't seem to be free'ing pad. Fix these. Addresses-Coverity: ("Resource leak") | |||||
| CVE-2021-47052 | 1 Linux | 1 Linux Kernel | 2024-12-09 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: crypto: sa2ul - Fix memory leak of rxd There are two error return paths that are not freeing rxd and causing memory leaks. Fix these. Addresses-Coverity: ("Resource leak") | |||||