Total
15057 CVE
| CVE | Vendors | Products | Updated | CVSS v2 | CVSS v3 |
|---|---|---|---|---|---|
| CVE-2023-53187 | 1 Linux | 1 Linux Kernel | 2025-12-02 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix use-after-free of new block group that became unused If a task creates a new block group and that block group becomes unused before we finish its creation, at btrfs_create_pending_block_groups(), then when btrfs_mark_bg_unused() is called against the block group, we assume that the block group is currently in the list of block groups to reclaim, and we move it out of the list of new block groups and into the list of unused block groups. This has two consequences: 1) We move it out of the list of new block groups associated to the current transaction. So the block group creation is not finished and if we attempt to delete the bg because it's unused, we will not find the block group item in the extent tree (or the new block group tree), its device extent items in the device tree etc, resulting in the deletion to fail due to the missing items; 2) We don't increment the reference count on the block group when we move it to the list of unused block groups, because we assumed the block group was on the list of block groups to reclaim, and in that case it already has the correct reference count. However the block group was on the list of new block groups, in which case no extra reference was taken because it's local to the current task. This later results in doing an extra reference count decrement when removing the block group from the unused list, eventually leading the reference count to 0. This second case was caught when running generic/297 from fstests, which produced the following assertion failure and stack trace: [589.559] assertion failed: refcount_read(&block_group->refs) == 1, in fs/btrfs/block-group.c:4299 [589.559] ------------[ cut here ]------------ [589.559] kernel BUG at fs/btrfs/block-group.c:4299! [589.560] invalid opcode: 0000 [#1] PREEMPT SMP PTI [589.560] CPU: 8 PID: 2819134 Comm: umount Tainted: G W 6.4.0-rc6-btrfs-next-134+ #1 [589.560] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [589.560] RIP: 0010:btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.561] Code: 68 62 da c0 (...) [589.561] RSP: 0018:ffffa55a8c3b3d98 EFLAGS: 00010246 [589.561] RAX: 0000000000000058 RBX: ffff8f030d7f2000 RCX: 0000000000000000 [589.562] RDX: 0000000000000000 RSI: ffffffff953f0878 RDI: 00000000ffffffff [589.562] RBP: ffff8f030d7f2088 R08: 0000000000000000 R09: ffffa55a8c3b3c50 [589.562] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8f05850b4c00 [589.562] R13: ffff8f030d7f2090 R14: ffff8f05850b4cd8 R15: dead000000000100 [589.563] FS: 00007f497fd2e840(0000) GS:ffff8f09dfc00000(0000) knlGS:0000000000000000 [589.563] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [589.563] CR2: 00007f497ff8ec10 CR3: 0000000271472006 CR4: 0000000000370ee0 [589.563] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [589.564] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [589.564] Call Trace: [589.564] <TASK> [589.565] ? __die_body+0x1b/0x60 [589.565] ? die+0x39/0x60 [589.565] ? do_trap+0xeb/0x110 [589.565] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.566] ? do_error_trap+0x6a/0x90 [589.566] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.566] ? exc_invalid_op+0x4e/0x70 [589.566] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.567] ? asm_exc_invalid_op+0x16/0x20 [589.567] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.567] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs] [589.567] close_ctree+0x35d/0x560 [btrfs] [589.568] ? fsnotify_sb_delete+0x13e/0x1d0 [589.568] ? dispose_list+0x3a/0x50 [589.568] ? evict_inodes+0x151/0x1a0 [589.568] generic_shutdown_super+0x73/0x1a0 [589.569] kill_anon_super+0x14/0x30 [589.569] btrfs_kill_super+0x12/0x20 [btrfs] [589.569] deactivate_locked ---truncated--- | |||||
| CVE-2023-53188 | 1 Linux | 1 Linux Kernel | 2025-12-02 | N/A | 4.7 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix race on port output assume the following setup on a single machine: 1. An openvswitch instance with one bridge and default flows 2. two network namespaces "server" and "client" 3. two ovs interfaces "server" and "client" on the bridge 4. for each ovs interface a veth pair with a matching name and 32 rx and tx queues 5. move the ends of the veth pairs to the respective network namespaces 6. assign ip addresses to each of the veth ends in the namespaces (needs to be the same subnet) 7. start some http server on the server network namespace 8. test if a client in the client namespace can reach the http server when following the actions below the host has a chance of getting a cpu stuck in a infinite loop: 1. send a large amount of parallel requests to the http server (around 3000 curls should work) 2. in parallel delete the network namespace (do not delete interfaces or stop the server, just kill the namespace) there is a low chance that this will cause the below kernel cpu stuck message. If this does not happen just retry. Below there is also the output of bpftrace for the functions mentioned in the output. The series of events happening here is: 1. the network namespace is deleted calling `unregister_netdevice_many_notify` somewhere in the process 2. this sets first `NETREG_UNREGISTERING` on both ends of the veth and then runs `synchronize_net` 3. it then calls `call_netdevice_notifiers` with `NETDEV_UNREGISTER` 4. this is then handled by `dp_device_event` which calls `ovs_netdev_detach_dev` (if a vport is found, which is the case for the veth interface attached to ovs) 5. this removes the rx_handlers of the device but does not prevent packages to be sent to the device 6. `dp_device_event` then queues the vport deletion to work in background as a ovs_lock is needed that we do not hold in the unregistration path 7. `unregister_netdevice_many_notify` continues to call `netdev_unregister_kobject` which sets `real_num_tx_queues` to 0 8. port deletion continues (but details are not relevant for this issue) 9. at some future point the background task deletes the vport If after 7. but before 9. a packet is send to the ovs vport (which is not deleted at this point in time) which forwards it to the `dev_queue_xmit` flow even though the device is unregistering. In `skb_tx_hash` (which is called in the `dev_queue_xmit`) path there is a while loop (if the packet has a rx_queue recorded) that is infinite if `dev->real_num_tx_queues` is zero. To prevent this from happening we update `do_output` to handle devices without carrier the same as if the device is not found (which would be the code path after 9. is done). Additionally we now produce a warning in `skb_tx_hash` if we will hit the infinite loop. bpftrace (first word is function name): __dev_queue_xmit server: real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1 netdev_core_pick_tx server: addr: 0xffff9f0a46d4a000 real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1 dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 2, reg_state: 1 synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024 synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024 synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024 synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024 dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 6, reg_state: 2 ovs_netdev_detach_dev server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, reg_state: 2 netdev_rx_handler_unregister server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2 synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024 netdev_rx_handler_unregister ret server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2 dp_ ---truncated--- | |||||
| CVE-2023-53189 | 1 Linux | 1 Linux Kernel | 2025-12-02 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: ipv6/addrconf: fix a potential refcount underflow for idev Now in addrconf_mod_rs_timer(), reference idev depends on whether rs_timer is not pending. Then modify rs_timer timeout. There is a time gap in [1], during which if the pending rs_timer becomes not pending. It will miss to hold idev, but the rs_timer is activated. Thus rs_timer callback function addrconf_rs_timer() will be executed and put idev later without holding idev. A refcount underflow issue for idev can be caused by this. if (!timer_pending(&idev->rs_timer)) in6_dev_hold(idev); <--------------[1] mod_timer(&idev->rs_timer, jiffies + when); To fix the issue, hold idev if mod_timer() return 0. | |||||
| CVE-2023-53190 | 1 Linux | 1 Linux Kernel | 2025-12-02 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: Fix memory leaks in error path The memory allocated by vxlan_vnigroup_init() is not freed in the error path, leading to memory leaks [1]. Fix by calling vxlan_vnigroup_uninit() in the error path. The leaks can be reproduced by annotating gro_cells_init() with ALLOW_ERROR_INJECTION() and then running: # echo "100" > /sys/kernel/debug/fail_function/probability # echo "1" > /sys/kernel/debug/fail_function/times # echo "gro_cells_init" > /sys/kernel/debug/fail_function/inject # printf %#x -12 > /sys/kernel/debug/fail_function/gro_cells_init/retval # ip link add name vxlan0 type vxlan dstport 4789 external vnifilter RTNETLINK answers: Cannot allocate memory [1] unreferenced object 0xffff88810db84a00 (size 512): comm "ip", pid 330, jiffies 4295010045 (age 66.016s) hex dump (first 32 bytes): f8 d5 76 0e 81 88 ff ff 01 00 00 00 00 00 00 02 ..v............. 03 00 04 00 48 00 00 00 00 00 00 01 04 00 01 00 ....H........... backtrace: [<ffffffff81a3097a>] kmalloc_trace+0x2a/0x60 [<ffffffff82f049fc>] vxlan_vnigroup_init+0x4c/0x160 [<ffffffff82ecd69e>] vxlan_init+0x1ae/0x280 [<ffffffff836858ca>] register_netdevice+0x57a/0x16d0 [<ffffffff82ef67b7>] __vxlan_dev_create+0x7c7/0xa50 [<ffffffff82ef6ce6>] vxlan_newlink+0xd6/0x130 [<ffffffff836d02ab>] __rtnl_newlink+0x112b/0x18a0 [<ffffffff836d0a8c>] rtnl_newlink+0x6c/0xa0 [<ffffffff836c0ddf>] rtnetlink_rcv_msg+0x43f/0xd40 [<ffffffff83908ce0>] netlink_rcv_skb+0x170/0x440 [<ffffffff839066af>] netlink_unicast+0x53f/0x810 [<ffffffff839072d8>] netlink_sendmsg+0x958/0xe70 [<ffffffff835c319f>] ____sys_sendmsg+0x78f/0xa90 [<ffffffff835cd6da>] ___sys_sendmsg+0x13a/0x1e0 [<ffffffff835cd94c>] __sys_sendmsg+0x11c/0x1f0 [<ffffffff8424da78>] do_syscall_64+0x38/0x80 unreferenced object 0xffff88810e76d5f8 (size 192): comm "ip", pid 330, jiffies 4295010045 (age 66.016s) hex dump (first 32 bytes): 04 00 00 00 00 00 00 00 db e1 4f e7 00 00 00 00 ..........O..... 08 d6 76 0e 81 88 ff ff 08 d6 76 0e 81 88 ff ff ..v.......v..... backtrace: [<ffffffff81a3162e>] __kmalloc_node+0x4e/0x90 [<ffffffff81a0e166>] kvmalloc_node+0xa6/0x1f0 [<ffffffff8276e1a3>] bucket_table_alloc.isra.0+0x83/0x460 [<ffffffff8276f18b>] rhashtable_init+0x43b/0x7c0 [<ffffffff82f04a1c>] vxlan_vnigroup_init+0x6c/0x160 [<ffffffff82ecd69e>] vxlan_init+0x1ae/0x280 [<ffffffff836858ca>] register_netdevice+0x57a/0x16d0 [<ffffffff82ef67b7>] __vxlan_dev_create+0x7c7/0xa50 [<ffffffff82ef6ce6>] vxlan_newlink+0xd6/0x130 [<ffffffff836d02ab>] __rtnl_newlink+0x112b/0x18a0 [<ffffffff836d0a8c>] rtnl_newlink+0x6c/0xa0 [<ffffffff836c0ddf>] rtnetlink_rcv_msg+0x43f/0xd40 [<ffffffff83908ce0>] netlink_rcv_skb+0x170/0x440 [<ffffffff839066af>] netlink_unicast+0x53f/0x810 [<ffffffff839072d8>] netlink_sendmsg+0x958/0xe70 [<ffffffff835c319f>] ____sys_sendmsg+0x78f/0xa90 | |||||
| CVE-2023-53191 | 1 Linux | 1 Linux Kernel | 2025-12-02 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/alpine-msi: Fix refcount leak in alpine_msix_init_domains of_irq_find_parent() returns a node pointer with refcount incremented, We should use of_node_put() on it when not needed anymore. Add missing of_node_put() to avoid refcount leak. | |||||
| CVE-2023-53192 | 1 Linux | 1 Linux Kernel | 2025-12-02 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: Fix nexthop hash size The nexthop code expects a 31 bit hash, such as what is returned by fib_multipath_hash() and rt6_multipath_hash(). Passing the 32 bit hash returned by skb_get_hash() can lead to problems related to the fact that 'int hash' is a negative number when the MSB is set. In the case of hash threshold nexthop groups, nexthop_select_path_hthr() will disproportionately select the first nexthop group entry. In the case of resilient nexthop groups, nexthop_select_path_res() may do an out of bounds access in nh_buckets[], for example: hash = -912054133 num_nh_buckets = 2 bucket_index = 65535 which leads to the following panic: BUG: unable to handle page fault for address: ffffc900025910c8 PGD 100000067 P4D 100000067 PUD 10026b067 PMD 0 Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI CPU: 4 PID: 856 Comm: kworker/4:3 Not tainted 6.5.0-rc2+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:nexthop_select_path+0x197/0xbf0 Code: c1 e4 05 be 08 00 00 00 4c 8b 35 a4 14 7e 01 4e 8d 6c 25 00 4a 8d 7c 25 08 48 01 dd e8 c2 25 15 ff 49 8d 7d 08 e8 39 13 15 ff <4d> 89 75 08 48 89 ef e8 7d 12 15 ff 48 8b 5d 00 e8 14 55 2f 00 85 RSP: 0018:ffff88810c36f260 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000002000c0 RCX: ffffffffaf02dd77 RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffffc900025910c8 RBP: ffffc900025910c0 R08: 0000000000000001 R09: fffff520004b2219 R10: ffffc900025910cf R11: 31392d2068736168 R12: 00000000002000c0 R13: ffffc900025910c0 R14: 00000000fffef608 R15: ffff88811840e900 FS: 0000000000000000(0000) GS:ffff8881f7000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc900025910c8 CR3: 0000000129d00000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x23/0x70 ? page_fault_oops+0x1ee/0x5c0 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? __pfx_page_fault_oops+0x10/0x10 ? search_bpf_extables+0xfe/0x1c0 ? fixup_exception+0x3b/0x470 ? exc_page_fault+0xf6/0x110 ? asm_exc_page_fault+0x26/0x30 ? nexthop_select_path+0x197/0xbf0 ? nexthop_select_path+0x197/0xbf0 ? lock_is_held_type+0xe7/0x140 vxlan_xmit+0x5b2/0x2340 ? __lock_acquire+0x92b/0x3370 ? __pfx_vxlan_xmit+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_register_lock_class+0x10/0x10 ? skb_network_protocol+0xce/0x2d0 ? dev_hard_start_xmit+0xca/0x350 ? __pfx_vxlan_xmit+0x10/0x10 dev_hard_start_xmit+0xca/0x350 __dev_queue_xmit+0x513/0x1e20 ? __pfx___dev_queue_xmit+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? mark_held_locks+0x44/0x90 ? skb_push+0x4c/0x80 ? eth_header+0x81/0xe0 ? __pfx_eth_header+0x10/0x10 ? neigh_resolve_output+0x215/0x310 ? ip6_finish_output2+0x2ba/0xc90 ip6_finish_output2+0x2ba/0xc90 ? lock_release+0x236/0x3e0 ? ip6_mtu+0xbb/0x240 ? __pfx_ip6_finish_output2+0x10/0x10 ? find_held_lock+0x83/0xa0 ? lock_is_held_type+0xe7/0x140 ip6_finish_output+0x1ee/0x780 ip6_output+0x138/0x460 ? __pfx_ip6_output+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 ? __pfx_ip6_finish_output+0x10/0x10 NF_HOOK.constprop.0+0xc0/0x420 ? __pfx_NF_HOOK.constprop.0+0x10/0x10 ? ndisc_send_skb+0x2c0/0x960 ? __pfx_lock_release+0x10/0x10 ? __local_bh_enable_ip+0x93/0x110 ? lock_is_held_type+0xe7/0x140 ndisc_send_skb+0x4be/0x960 ? __pfx_ndisc_send_skb+0x10/0x10 ? mark_held_locks+0x65/0x90 ? find_held_lock+0x83/0xa0 ndisc_send_ns+0xb0/0x110 ? __pfx_ndisc_send_ns+0x10/0x10 addrconf_dad_work+0x631/0x8e0 ? lock_acquire+0x180/0x3f0 ? __pfx_addrconf_dad_work+0x10/0x10 ? mark_held_locks+0x24/0x90 process_one_work+0x582/0x9c0 ? __pfx_process_one_work+0x10/0x10 ? __pfx_do_raw_spin_lock+0x10/0x10 ? mark_held_locks+0x24/0x90 worker_thread+0x93/0x630 ? __kthread_parkme+0xdc/0x100 ? __pfx_worker_thread+0x10/0x10 kthread+0x1a5/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x60 ---truncated--- | |||||
| CVE-2023-53193 | 1 Linux | 1 Linux Kernel | 2025-12-02 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini The gmc.ecc_irq is enabled by firmware per IFWI setting, and the host driver is not privileged to enable/disable the interrupt. So, it is meaningless to use the amdgpu_irq_put function in gmc_v10_0_hw_fini, which also leads to the call trace. [ 82.340264] Call Trace: [ 82.340265] <TASK> [ 82.340269] gmc_v10_0_hw_fini+0x83/0xa0 [amdgpu] [ 82.340447] gmc_v10_0_suspend+0xe/0x20 [amdgpu] [ 82.340623] amdgpu_device_ip_suspend_phase2+0x127/0x1c0 [amdgpu] [ 82.340789] amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu] [ 82.340955] amdgpu_device_pre_asic_reset+0xdd/0x2b0 [amdgpu] [ 82.341122] amdgpu_device_gpu_recover.cold+0x4dd/0xbb2 [amdgpu] [ 82.341359] amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu] [ 82.341529] process_one_work+0x21d/0x3f0 [ 82.341535] worker_thread+0x1fa/0x3c0 [ 82.341538] ? process_one_work+0x3f0/0x3f0 [ 82.341540] kthread+0xff/0x130 [ 82.341544] ? kthread_complete_and_exit+0x20/0x20 [ 82.341547] ret_from_fork+0x22/0x30 | |||||
| CVE-2023-53194 | 1 Linux | 1 Linux Kernel | 2025-12-02 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Add length check in indx_get_root This adds a length check to guarantee the retrieved index root is legit. [ 162.459513] BUG: KASAN: use-after-free in hdr_find_e.isra.0+0x10c/0x320 [ 162.460176] Read of size 2 at addr ffff8880037bca99 by task mount/243 [ 162.460851] [ 162.461252] CPU: 0 PID: 243 Comm: mount Not tainted 6.0.0-rc7 #42 [ 162.461744] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 162.462609] Call Trace: [ 162.462954] <TASK> [ 162.463276] dump_stack_lvl+0x49/0x63 [ 162.463822] print_report.cold+0xf5/0x689 [ 162.464608] ? unwind_get_return_address+0x3a/0x60 [ 162.465766] ? hdr_find_e.isra.0+0x10c/0x320 [ 162.466975] kasan_report+0xa7/0x130 [ 162.467506] ? _raw_spin_lock_irq+0xc0/0xf0 [ 162.467998] ? hdr_find_e.isra.0+0x10c/0x320 [ 162.468536] __asan_load2+0x68/0x90 [ 162.468923] hdr_find_e.isra.0+0x10c/0x320 [ 162.469282] ? cmp_uints+0xe0/0xe0 [ 162.469557] ? cmp_sdh+0x90/0x90 [ 162.469864] ? ni_find_attr+0x214/0x300 [ 162.470217] ? ni_load_mi+0x80/0x80 [ 162.470479] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 162.470931] ? ntfs_bread_run+0x190/0x190 [ 162.471307] ? indx_get_root+0xe4/0x190 [ 162.471556] ? indx_get_root+0x140/0x190 [ 162.471833] ? indx_init+0x1e0/0x1e0 [ 162.472069] ? fnd_clear+0x115/0x140 [ 162.472363] ? _raw_spin_lock_irqsave+0x100/0x100 [ 162.472731] indx_find+0x184/0x470 [ 162.473461] ? sysvec_apic_timer_interrupt+0x57/0xc0 [ 162.474429] ? indx_find_buffer+0x2d0/0x2d0 [ 162.474704] ? do_syscall_64+0x3b/0x90 [ 162.474962] dir_search_u+0x196/0x2f0 [ 162.475381] ? ntfs_nls_to_utf16+0x450/0x450 [ 162.475661] ? ntfs_security_init+0x3d6/0x440 [ 162.475906] ? is_sd_valid+0x180/0x180 [ 162.476191] ntfs_extend_init+0x13f/0x2c0 [ 162.476496] ? ntfs_fix_post_read+0x130/0x130 [ 162.476861] ? iput.part.0+0x286/0x320 [ 162.477325] ntfs_fill_super+0x11e0/0x1b50 [ 162.477709] ? put_ntfs+0x1d0/0x1d0 [ 162.477970] ? vsprintf+0x20/0x20 [ 162.478258] ? set_blocksize+0x95/0x150 [ 162.478538] get_tree_bdev+0x232/0x370 [ 162.478789] ? put_ntfs+0x1d0/0x1d0 [ 162.479038] ntfs_fs_get_tree+0x15/0x20 [ 162.479374] vfs_get_tree+0x4c/0x130 [ 162.479729] path_mount+0x654/0xfe0 [ 162.480124] ? putname+0x80/0xa0 [ 162.480484] ? finish_automount+0x2e0/0x2e0 [ 162.480894] ? putname+0x80/0xa0 [ 162.481467] ? kmem_cache_free+0x1c4/0x440 [ 162.482280] ? putname+0x80/0xa0 [ 162.482714] do_mount+0xd6/0xf0 [ 162.483264] ? path_mount+0xfe0/0xfe0 [ 162.484782] ? __kasan_check_write+0x14/0x20 [ 162.485593] __x64_sys_mount+0xca/0x110 [ 162.486024] do_syscall_64+0x3b/0x90 [ 162.486543] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 162.487141] RIP: 0033:0x7f9d374e948a [ 162.488324] Code: 48 8b 0d 11 fa 2a 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 008 [ 162.489728] RSP: 002b:00007ffe30e73d18 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 [ 162.490971] RAX: ffffffffffffffda RBX: 0000561cdb43a060 RCX: 00007f9d374e948a [ 162.491669] RDX: 0000561cdb43a260 RSI: 0000561cdb43a2e0 RDI: 0000561cdb442af0 [ 162.492050] RBP: 0000000000000000 R08: 0000561cdb43a280 R09: 0000000000000020 [ 162.492459] R10: 00000000c0ed0000 R11: 0000000000000206 R12: 0000561cdb442af0 [ 162.493183] R13: 0000561cdb43a260 R14: 0000000000000000 R15: 00000000ffffffff [ 162.493644] </TASK> [ 162.493908] [ 162.494214] The buggy address belongs to the physical page: [ 162.494761] page:000000003e38a3d5 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x37bc [ 162.496064] flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff) [ 162.497278] raw: 000fffffc0000000 ffffea00000df1c8 ffffea00000df008 0000000000000000 [ 162.498928] raw: 0000000000000000 0000000000240000 00000000ffffffff 0000000000000000 [ 162.500542] page dumped becau ---truncated--- | |||||
| CVE-2023-53195 | 1 Linux | 1 Linux Kernel | 2025-12-02 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: mlxsw: minimal: fix potential memory leak in mlxsw_m_linecards_init The line cards array is not freed in the error path of mlxsw_m_linecards_init(), which can lead to a memory leak. Fix by freeing the array in the error path, thereby making the error path identical to mlxsw_m_linecards_fini(). | |||||
| CVE-2025-38643 | 1 Linux | 1 Linux Kernel | 2025-12-01 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Add missing lock in cfg80211_check_and_end_cac() Callers of wdev_chandef() must hold the wiphy mutex. But the worker cfg80211_propagate_cac_done_wk() never takes the lock. Which triggers the warning below with the mesh_peer_connected_dfs test from hostapd and not (yet) released mac80211 code changes: WARNING: CPU: 0 PID: 495 at net/wireless/chan.c:1552 wdev_chandef+0x60/0x165 Modules linked in: CPU: 0 UID: 0 PID: 495 Comm: kworker/u4:2 Not tainted 6.14.0-rc5-wt-g03960e6f9d47 #33 13c287eeabfe1efea01c0bcc863723ab082e17cf Workqueue: cfg80211 cfg80211_propagate_cac_done_wk Stack: 00000000 00000001 ffffff00 6093267c 00000000 6002ec30 6d577c50 60037608 00000000 67e8d108 6063717b 00000000 Call Trace: [<6002ec30>] ? _printk+0x0/0x98 [<6003c2b3>] show_stack+0x10e/0x11a [<6002ec30>] ? _printk+0x0/0x98 [<60037608>] dump_stack_lvl+0x71/0xb8 [<6063717b>] ? wdev_chandef+0x60/0x165 [<6003766d>] dump_stack+0x1e/0x20 [<6005d1b7>] __warn+0x101/0x20f [<6005d3a8>] warn_slowpath_fmt+0xe3/0x15d [<600b0c5c>] ? mark_lock.part.0+0x0/0x4ec [<60751191>] ? __this_cpu_preempt_check+0x0/0x16 [<600b11a2>] ? mark_held_locks+0x5a/0x6e [<6005d2c5>] ? warn_slowpath_fmt+0x0/0x15d [<60052e53>] ? unblock_signals+0x3a/0xe7 [<60052f2d>] ? um_set_signals+0x2d/0x43 [<60751191>] ? __this_cpu_preempt_check+0x0/0x16 [<607508b2>] ? lock_is_held_type+0x207/0x21f [<6063717b>] wdev_chandef+0x60/0x165 [<605f89b4>] regulatory_propagate_dfs_state+0x247/0x43f [<60052f00>] ? um_set_signals+0x0/0x43 [<605e6bfd>] cfg80211_propagate_cac_done_wk+0x3a/0x4a [<6007e460>] process_scheduled_works+0x3bc/0x60e [<6007d0ec>] ? move_linked_works+0x4d/0x81 [<6007d120>] ? assign_work+0x0/0xaa [<6007f81f>] worker_thread+0x220/0x2dc [<600786ef>] ? set_pf_worker+0x0/0x57 [<60087c96>] ? to_kthread+0x0/0x43 [<6008ab3c>] kthread+0x2d3/0x2e2 [<6007f5ff>] ? worker_thread+0x0/0x2dc [<6006c05b>] ? calculate_sigpending+0x0/0x56 [<6003b37d>] new_thread_handler+0x4a/0x64 irq event stamp: 614611 hardirqs last enabled at (614621): [<00000000600bc96b>] __up_console_sem+0x82/0xaf hardirqs last disabled at (614630): [<00000000600bc92c>] __up_console_sem+0x43/0xaf softirqs last enabled at (614268): [<00000000606c55c6>] __ieee80211_wake_queue+0x933/0x985 softirqs last disabled at (614266): [<00000000606c52d6>] __ieee80211_wake_queue+0x643/0x985 | |||||
| CVE-2021-26829 | 3 Linux, Microsoft, Scadabr | 3 Linux Kernel, Windows, Scadabr | 2025-12-01 | 3.5 LOW | 5.4 MEDIUM |
| OpenPLC ScadaBR through 0.9.1 on Linux and through 1.12.4 on Windows allows stored XSS via system_settings.shtm. | |||||
| CVE-2024-35866 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-01 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in cifs_dump_full_key() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF. | |||||
| CVE-2024-27008 | 3 Debian, Fedoraproject, Linux | 3 Debian Linux, Fedora, Linux Kernel | 2025-12-01 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: drm: nv04: Fix out of bounds access When Output Resource (dcb->or) value is assigned in fabricate_dcb_output(), there may be out of bounds access to dac_users array in case dcb->or is zero because ffs(dcb->or) is used as index there. The 'or' argument of fabricate_dcb_output() must be interpreted as a number of bit to set, not value. Utilize macros from 'enum nouveau_or' in calls instead of hardcoding. Found by Linux Verification Center (linuxtesting.org) with SVACE. | |||||
| CVE-2024-26944 | 1 Linux | 1 Linux Kernel | 2025-12-01 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix use-after-free in do_zone_finish() Shinichiro reported the following use-after-free triggered by the device replace operation in fstests btrfs/070. BTRFS info (device nullb1): scrub: finished on devid 1 with status: 0 ================================================================== BUG: KASAN: slab-use-after-free in do_zone_finish+0x91a/0xb90 [btrfs] Read of size 8 at addr ffff8881543c8060 by task btrfs-cleaner/3494007 CPU: 0 PID: 3494007 Comm: btrfs-cleaner Tainted: G W 6.8.0-rc5-kts #1 Hardware name: Supermicro Super Server/X11SPi-TF, BIOS 3.3 02/21/2020 Call Trace: <TASK> dump_stack_lvl+0x5b/0x90 print_report+0xcf/0x670 ? __virt_addr_valid+0x200/0x3e0 kasan_report+0xd8/0x110 ? do_zone_finish+0x91a/0xb90 [btrfs] ? do_zone_finish+0x91a/0xb90 [btrfs] do_zone_finish+0x91a/0xb90 [btrfs] btrfs_delete_unused_bgs+0x5e1/0x1750 [btrfs] ? __pfx_btrfs_delete_unused_bgs+0x10/0x10 [btrfs] ? btrfs_put_root+0x2d/0x220 [btrfs] ? btrfs_clean_one_deleted_snapshot+0x299/0x430 [btrfs] cleaner_kthread+0x21e/0x380 [btrfs] ? __pfx_cleaner_kthread+0x10/0x10 [btrfs] kthread+0x2e3/0x3c0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> Allocated by task 3493983: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 btrfs_alloc_device+0xb3/0x4e0 [btrfs] device_list_add.constprop.0+0x993/0x1630 [btrfs] btrfs_scan_one_device+0x219/0x3d0 [btrfs] btrfs_control_ioctl+0x26e/0x310 [btrfs] __x64_sys_ioctl+0x134/0x1b0 do_syscall_64+0x99/0x190 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Freed by task 3494056: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3f/0x60 poison_slab_object+0x102/0x170 __kasan_slab_free+0x32/0x70 kfree+0x11b/0x320 btrfs_rm_dev_replace_free_srcdev+0xca/0x280 [btrfs] btrfs_dev_replace_finishing+0xd7e/0x14f0 [btrfs] btrfs_dev_replace_by_ioctl+0x1286/0x25a0 [btrfs] btrfs_ioctl+0xb27/0x57d0 [btrfs] __x64_sys_ioctl+0x134/0x1b0 do_syscall_64+0x99/0x190 entry_SYSCALL_64_after_hwframe+0x6e/0x76 The buggy address belongs to the object at ffff8881543c8000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 96 bytes inside of freed 1024-byte region [ffff8881543c8000, ffff8881543c8400) The buggy address belongs to the physical page: page:00000000fe2c1285 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1543c8 head:00000000fe2c1285 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x17ffffc0000840(slab|head|node=0|zone=2|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 0017ffffc0000840 ffff888100042dc0 ffffea0019e8f200 dead000000000002 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881543c7f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8881543c7f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8881543c8000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881543c8080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881543c8100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb This UAF happens because we're accessing stale zone information of a already removed btrfs_device in do_zone_finish(). The sequence of events is as follows: btrfs_dev_replace_start btrfs_scrub_dev btrfs_dev_replace_finishing btrfs_dev_replace_update_device_in_mapping_tree <-- devices replaced btrfs_rm_dev_replace_free_srcdev btrfs_free_device <-- device freed cleaner_kthread btrfs_delete_unused_bgs btrfs_zone_finish do_zone_finish <-- refers the freed device The reason for this is that we're using a ---truncated--- | |||||
| CVE-2024-26928 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-12-01 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in cifs_debug_files_proc_show() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF. | |||||
| CVE-2025-38627 | 1 Linux | 1 Linux Kernel | 2025-12-01 | N/A | 7.8 HIGH |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix UAF of f2fs_inode_info in f2fs_free_dic The decompress_io_ctx may be released asynchronously after I/O completion. If this file is deleted immediately after read, and the kworker of processing post_read_wq has not been executed yet due to high workloads, It is possible that the inode(f2fs_inode_info) is evicted and freed before it is used f2fs_free_dic. The UAF case as below: Thread A Thread B - f2fs_decompress_end_io - f2fs_put_dic - queue_work add free_dic work to post_read_wq - do_unlink - iput - evict - call_rcu This file is deleted after read. Thread C kworker to process post_read_wq - rcu_do_batch - f2fs_free_inode - kmem_cache_free inode is freed by rcu - process_scheduled_works - f2fs_late_free_dic - f2fs_free_dic - f2fs_release_decomp_mem read (dic->inode)->i_compress_algorithm This patch store compress_algorithm and sbi in dic to avoid inode UAF. In addition, the previous solution is deprecated in [1] may cause system hang. [1] https://lore.kernel.org/all/c36ab955-c8db-4a8b-a9d0-f07b5f426c3f@kernel.org | |||||
| CVE-2022-50178 | 1 Linux | 1 Linux Kernel | 2025-11-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: 8852a: rfk: fix div 0 exception The DPK is a kind of RF calibration whose algorithm is to fine tune parameters and calibrate, and check the result. If the result isn't good enough, it could adjust parameters and try again. This issue is to read and show the result, but it could be a negative calibration result that causes divisor 0 and core dump. So, fix it by phy_div() that does division only if divisor isn't zero; otherwise, zero is adopted. divide error: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 728 Comm: wpa_supplicant Not tainted 5.10.114-16019-g462a1661811a #1 <HASH:d024 28> RIP: 0010:rtw8852a_dpk+0x14ae/0x288f [rtw89_core] RSP: 0018:ffffa9bb412a7520 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 00000000000180fc RDI: ffffa141d01023c0 RBP: ffffa9bb412a76a0 R08: 0000000000001319 R09: 00000000ffffff92 R10: ffffffffc0292de3 R11: ffffffffc00d2f51 R12: 0000000000000000 R13: ffffa141d01023c0 R14: ffffffffc0290250 R15: ffffa141d0102638 FS: 00007fa99f5c2740(0000) GS:ffffa142e5e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000013e8e010 CR3: 0000000110d2c000 CR4: 0000000000750ee0 PKRU: 55555554 Call Trace: rtw89_core_sta_add+0x95/0x9c [rtw89_core <HASH:d239 29>] rtw89_ops_sta_state+0x5d/0x108 [rtw89_core <HASH:d239 29>] drv_sta_state+0x115/0x66f [mac80211 <HASH:81fe 30>] sta_info_insert_rcu+0x45c/0x713 [mac80211 <HASH:81fe 30>] sta_info_insert+0xf/0x1b [mac80211 <HASH:81fe 30>] ieee80211_prep_connection+0x9d6/0xb0c [mac80211 <HASH:81fe 30>] ieee80211_mgd_auth+0x2aa/0x352 [mac80211 <HASH:81fe 30>] cfg80211_mlme_auth+0x160/0x1f6 [cfg80211 <HASH:00cd 31>] nl80211_authenticate+0x2e5/0x306 [cfg80211 <HASH:00cd 31>] genl_rcv_msg+0x371/0x3a1 ? nl80211_stop_sched_scan+0xe5/0xe5 [cfg80211 <HASH:00cd 31>] ? genl_rcv+0x36/0x36 netlink_rcv_skb+0x8a/0xf9 genl_rcv+0x28/0x36 netlink_unicast+0x27b/0x3a0 netlink_sendmsg+0x2aa/0x469 sock_sendmsg_nosec+0x49/0x4d ____sys_sendmsg+0xe5/0x213 __sys_sendmsg+0xec/0x157 ? syscall_enter_from_user_mode+0xd7/0x116 do_syscall_64+0x43/0x55 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fa99f6e689b | |||||
| CVE-2022-50177 | 1 Linux | 1 Linux Kernel | 2025-11-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: rcutorture: Fix ksoftirqd boosting timing and iteration The RCU priority boosting can fail in two situations: 1) If (nr_cpus= > maxcpus=), which means if the total number of CPUs is higher than those brought online at boot, then torture_onoff() may later bring up CPUs that weren't online on boot. Now since rcutorture initialization only boosts the ksoftirqds of the CPUs that have been set online on boot, the CPUs later set online by torture_onoff won't benefit from the boost, making RCU priority boosting fail. 2) The ksoftirqd kthreads are boosted after the creation of rcu_torture_boost() kthreads, which opens a window large enough for these rcu_torture_boost() kthreads to wait (despite running at FIFO priority) for ksoftirqds that are still running at SCHED_NORMAL priority. The issues can trigger for example with: ./kvm.sh --configs TREE01 --kconfig "CONFIG_RCU_BOOST=y" [ 34.968561] rcu-torture: !!! [ 34.968627] ------------[ cut here ]------------ [ 35.014054] WARNING: CPU: 4 PID: 114 at kernel/rcu/rcutorture.c:1979 rcu_torture_stats_print+0x5ad/0x610 [ 35.052043] Modules linked in: [ 35.069138] CPU: 4 PID: 114 Comm: rcu_torture_sta Not tainted 5.18.0-rc1 #1 [ 35.096424] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014 [ 35.154570] RIP: 0010:rcu_torture_stats_print+0x5ad/0x610 [ 35.198527] Code: 63 1b 02 00 74 02 0f 0b 48 83 3d 35 63 1b 02 00 74 02 0f 0b 48 83 3d 21 63 1b 02 00 74 02 0f 0b 48 83 3d 0d 63 1b 02 00 74 02 <0f> 0b 83 eb 01 0f 8e ba fc ff ff 0f 0b e9 b3 fc ff f82 [ 37.251049] RSP: 0000:ffffa92a0050bdf8 EFLAGS: 00010202 [ 37.277320] rcu: De-offloading 8 [ 37.290367] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000001 [ 37.290387] RDX: 0000000000000000 RSI: 00000000ffffbfff RDI: 00000000ffffffff [ 37.290398] RBP: 000000000000007b R08: 0000000000000000 R09: c0000000ffffbfff [ 37.290407] R10: 000000000000002a R11: ffffa92a0050bc18 R12: ffffa92a0050be20 [ 37.290417] R13: ffffa92a0050be78 R14: 0000000000000000 R15: 000000000001bea0 [ 37.290427] FS: 0000000000000000(0000) GS:ffff96045eb00000(0000) knlGS:0000000000000000 [ 37.290448] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 37.290460] CR2: 0000000000000000 CR3: 000000001dc0c000 CR4: 00000000000006e0 [ 37.290470] Call Trace: [ 37.295049] <TASK> [ 37.295065] ? preempt_count_add+0x63/0x90 [ 37.295095] ? _raw_spin_lock_irqsave+0x12/0x40 [ 37.295125] ? rcu_torture_stats_print+0x610/0x610 [ 37.295143] rcu_torture_stats+0x29/0x70 [ 37.295160] kthread+0xe3/0x110 [ 37.295176] ? kthread_complete_and_exit+0x20/0x20 [ 37.295193] ret_from_fork+0x22/0x30 [ 37.295218] </TASK> Fix this with boosting the ksoftirqds kthreads from the boosting hotplug callback itself and before the boosting kthreads are created. | |||||
| CVE-2022-50175 | 1 Linux | 1 Linux Kernel | 2025-11-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: media: tw686x: Fix memory leak in tw686x_video_init video_device_alloc() allocates memory for vdev, when video_register_device() fails, it doesn't release the memory and leads to memory leak, call video_device_release() to fix this. | |||||
| CVE-2022-50174 | 1 Linux | 1 Linux Kernel | 2025-11-28 | N/A | 5.5 MEDIUM |
| In the Linux kernel, the following vulnerability has been resolved: net: hinic: avoid kernel hung in hinic_get_stats64() When using hinic device as a bond slave device, and reading device stats of master bond device, the kernel may hung. The kernel panic calltrace as follows: Kernel panic - not syncing: softlockup: hung tasks Call trace: native_queued_spin_lock_slowpath+0x1ec/0x31c dev_get_stats+0x60/0xcc dev_seq_printf_stats+0x40/0x120 dev_seq_show+0x1c/0x40 seq_read_iter+0x3c8/0x4dc seq_read+0xe0/0x130 proc_reg_read+0xa8/0xe0 vfs_read+0xb0/0x1d4 ksys_read+0x70/0xfc __arm64_sys_read+0x20/0x30 el0_svc_common+0x88/0x234 do_el0_svc+0x2c/0x90 el0_svc+0x1c/0x30 el0_sync_handler+0xa8/0xb0 el0_sync+0x148/0x180 And the calltrace of task that actually caused kernel hungs as follows: __switch_to+124 __schedule+548 schedule+72 schedule_timeout+348 __down_common+188 __down+24 down+104 hinic_get_stats64+44 [hinic] dev_get_stats+92 bond_get_stats+172 [bonding] dev_get_stats+92 dev_seq_printf_stats+60 dev_seq_show+24 seq_read_iter+964 seq_read+220 proc_reg_read+164 vfs_read+172 ksys_read+108 __arm64_sys_read+28 el0_svc_common+132 do_el0_svc+40 el0_svc+24 el0_sync_handler+164 el0_sync+324 When getting device stats from bond, kernel will call bond_get_stats(). It first holds the spinlock bond->stats_lock, and then call hinic_get_stats64() to collect hinic device's stats. However, hinic_get_stats64() calls `down(&nic_dev->mgmt_lock)` to protect its critical section, which may schedule current task out. And if system is under high pressure, the task cannot be woken up immediately, which eventually triggers kernel hung panic. Since previous patch has replaced hinic_dev.tx_stats/rx_stats with local variable in hinic_get_stats64(), there is nothing need to be protected by lock, so just removing down()/up() is ok. | |||||